Tiles and Bath – Scorpio Property Pros

April 17, 2022

Cleaning recommendations for bathroom tapware faucets

Maintaining a clean and sparkling bathroom does not have to be a daunting task, and you do not have to rely on expensive cleaning products to keep dirt and grime at bay; there are various less expensive and natural tapware choices accessible in the kitchen cabinet. Adhere to our bathroom cleaning suggestions and you’ll have gleaming results in no time.

We understand how challenging it may be to maintain the beauty of your new bathroom, and the majority of us despise cleaning. As a consequence, we’ve created this helpful buy tapware, cleaning and maintenance guide to assist you in maintaining the beauty of your bathroom for years to come.

Cleaning all bathroom objects on a regular basis is critical to preventing the formation of limescale, dirt, and grime.

If you’ve just moved into a new house, you may have seen little areas of rust at the foot of the bath; these were most likely created by iron deposits on the tapware from the new water supply pipe. Remove the stains with a gentle cleanser; they should not recur unless the source of water remains contaminated.

Elimination of limescale

Limescale may be eliminated using a mild lemon juice solution or a vinegar and water solution in a 50:50 ratio. Allow about 5 minutes for the vinegar and water solution to rest before washing with warm water.

Bathroom ventilation

To help avoid mold development in your tapware, it is necessary to ventilate your bathroom, either by opening a window or installing an extractor fan.

While all of our tapware furniture is built of materials acceptable for use in a bathroom, we recommend keeping it away from the bath or shower to avoid water and soap residue splashes. If you are splashed with water, dry immediately. Click here to get how encountered tapware problems and their remedies.

Water pressure

Excessive water pressure may wreak havoc on plumbing components. Water pressure problems are often caused by trapped air in the pipes; this air may be eliminated by running the faucets for a few minutes. If you’ve just moved, you may notice that the water pressure is higher than you’re used to.

Steel baths

Steel bathtubs and faucets should be cleaned periodically with warm soapy water, then rinsed with clean water, dried, and polished as required with a soft cloth.

Cleaning your steel bath or tapware on a regular basis can assist prevent the collection of limescale. Certain proprietary cleaners may be detrimental to the enameled surface; as such, we strongly suggest you follow the manufacturer’s guidelines.

Avoid using bleach as it may cause the glossy surface to deteriorate. Strong disinfectants should always be used with caution and diluted.

Acrylic bathtubs

Acrylic bathtubs and faucets should be cleaned regularly with warm soapy water. In an ideal world, an acrylic bath would be cleaned immediately after each use, rinsed with cold water and dried with a soft towel as needed.

Because acrylic is softer than ceramic and porcelain enamel, avoid using abrasive cleaning solutions and scouring powders to prevent harming the surface.

All contact with household chemicals, including paint strippers, hair dyes, carpet dyes, strong disinfectants, alcohol, perfume, aftershave, bleach, nail polish, and nail polish remover, should be avoided. Certain soaps and shampoos may even stain the acrylic if allowed to pool undiluted on the surface.

Shower enclosures

Enclosures for shower tapware should be carefully cleaned after each use to prevent the collection of filth and limescale. We highly recommend removing water droplets using a squeegee or a soft cloth, but refrain from using harsh cleaning products. Shower gel and shampoo may also build, so rinse them completely with water. Remember to clean the sliding door track fittings to keep them operating properly.

Shower trays

Shower tray maintenance is simple; just clean with warm soapy water or a mild detergent and wipe dry with a soft towel after each usage. Never clean the surface with abrasive cleaners, since they may leave a mark. If the surface of the shower tray or tapware has fine scratches, T-cut may be applied and wiped away with a damp cloth. Additionally, the waste trap should be cleaned regularly, especially if the shower is utilized on a daily basis.

Plastic toilet seats

Clean plastic toilet seats on a regular basis with warm soapy water. Avoid using abrasive cleansers or scouring powders on the tapware surface, as they may cause damage.

Bathroom materials

The bathroom has a variety of materials, including glass, ceramic, and chrome. Adhere to our maintenance and cleaning guidelines for a range of materials.

Ceramic

Cleaning ceramic bathroom objects such as the basin and toilet on a regular basis with warm soapy water, rinsing with clean water, and, if required, drying and polishing with a soft cloth. Regular cleaning helps prevent the buildup of limescale, filth, and grime.

We recommend that before using a specialized cleaning solution on ceramic, you carefully read the instructions on the container, since some may cause damage to the glazed surface. Additionally, avoid storing aggressive cleaners such as bleach in ceramic goods overnight to prevent damaging the surface.

Glass

If you live in a hard water zone, avoid letting limescale to build up; if it does, removing it may be more difficult. Use a 50:50 mix of vinegar and water to remove limescale, but ensure that all vinegar is completely rinsed away. Additionally, limescale may be removed with a dilute lemon juice solution. Avoid strong detergents and cleaning chemicals at all costs, and never use abrasive products. If you must use a cleaning agent, choose one with a PH value between PH4 and PH8.

Stainless steel

Regular cleaning helps maintain the appearance of stainless steel tapware while also preventing corrosion and ensuring hygienic conditions. To clean stainless steel, just use warm soapy water or a light detergent, then rinse and dry with a soft towel. Caustic acids and disinfectants should be avoided. If a layer of filth accumulates, a specific stainless-steel cleaning solution may be used.

When using a proprietary cleaning, always follow the manufacturer’s instructions. Never use steel wool or steel wool soap pads, since they may leave rust stains.

April 17, 2022

Encountered tapware problems and their remedies

By Chelsea Blandowski in Tapware, Tiles and Bath Tag basin taps, basin tapware, laundry tapware, mixer taps, shower tapware, tapware australia, tapware problems, wall mixer

Numerous issues could occur when it comes to tapware, and we regularly receive a big quantity of questions on this topic. As a result, we’ve created a selection of our most often asked queries, together with some replies, to help you.

How did my faucets begin to drip or leak?

To ascertain why your faucets are leaking, you must first establish the sort of tapware faucet.

Hot and cold-water pillar faucets in the classic design

If your tapware faucets have separate hot and cold handles, the most typical explanation of leaking faucets is a malfunctioning seal or washer. If you transfer your seals and washers appropriately to a local repair shop or buy tapware online australia, you should be able to receive a replacement at a reasonable rate.

Faucet mixers

A leak in bathroom mixer tapware is generally caused by a malfunction with the tap’s ceramic cartridge. If you take the cartridge to a local plumber’s merchant, you should be able to purchase a new cartridge.

Is it complicated to change a faucet?

The simplicity with which tapware is installed varies by tap and location, but for the majority of do-it-yourself enthusiasts, replacing a faucet is a pretty easy process.

My faucets have been depressurized fully.

A decline in the pressure at your tapware faucets could be caused by a myriad of circumstances. While we’ve included some recommendations below, in this scenario, it’s better to consult a plumber who can examine the issue on-site.

Is your cold kitchen faucet operating properly?

Water frequently enters your home through the cold kitchen tapware faucet first; if water runs freely from this faucet but not from other faucets around the house, there may be an internal plumbing problem.

Do the emergency stop valves on your tapware totally open?

If the stop tapware valve is not totally open (which is frequently positioned beneath the kitchen sink), it may limit water supply to the house. Counterclockwise crank the faucet as far as possible to ensure that it is completely open.

Check for frozen pipes.

During the winter months, it is quite usual for exposed tapware pipes to freeze. This raises the chance of the pipes swelling and rupturing. Any visible pipes should be examined for evidence of damage or freezing.

Speak with your neighbours

Are your close neighbors reporting a decline in tap pressure as well? If this is the case, a fault with the exterior tapware’s water mains may occur, in which case you should contact your water provider or local council. Otherwise, a problem with your internal plumbing may occur.

Are you concurrently running several water systems?

If the demand for water in your house is excessively high at any point in time, this could have an effect on the pressure. Is your water pressure diminishing when you run the washing machine or shower? Conduct a tapware test by running the tap with all other sources turned off.

Conduct an inspection for the existence of an airlock.

Reduced water pressure may be caused by trapped air in the pipes of your tapware faucet. While there are various options for repairing an air lock in your taps, it is advisable that you consult a competent plumber.

Which approach is the most successful for eradicating limescale from faucets?

While there are various professional tapware cleaning methods that may efficiently remove ugly limescale from your faucets, lemon and vinegar are two easy and effective domestic components that may restore the shine to your faucets.

Attach a lemon or a cup of vinegar to the spout of your faucet and leave for about an hour (longer if the limescale is more resistant); this will help break down the limescale and make it easier to clean with a brush. Other portions of the tap may be addressed by soaking a cotton wool pad in vinegar or lemon juice and applying it to the afflicted spot. Learn more how to make your bathroom appear like a five-star hotel.

When planning a bathroom, kitchen, or other wet area building or renovation project, bear in mind that tapware selection is vital for each environment. Consider the following criteria when buying the tapware that best meets your needs.

1. The design of the room

Match the style of your tapware to the general dcor of the room. Sleek, crisp lines are necessary for modern and contemporary design. For an ultra-modern aesthetic, consider square or rectangular tapware with angular lines, while a traditional, rustic, or eclectic design may incorporate a variety of tapware types, such as the classic three-piece tapware with characteristic turned handles and curving spouts.

2. Tapware Construction Materials

It is crucial to use high-quality tapware, such as DR brass and non-toxic polymers and elastomers, and to have it correctly fitted. They must contain high-quality components such as the cartridge, the aerator, the hoses, and the rubber washers. Superior materials protect the safety of your drinking water, as well as the durability and longevity of your faucets and faucet accessories.

3. Tapware’s technical characteristics

Consider any special size demands prior to placing your purchase. When searching for kitchen faucets, for example, consider the spout height, reach (length), and swivel capabilities to ensure that tall stock pots and enormous oven pans do not become blocked. Additionally, you may wish to take into mind the size and depth of your kitchen sink to ensure that the two components are appropriately matched. Bear in mind that a deeper sink results in a higher spout. Apart from bench (hob) installation, you should research ‘off the wall’ or wall mounted solutions. The same concerns must be addressed when constructing toilets. Whether, for example, you have an above-mounted shaving cabinet with outward swinging doors, you should check if the height of the basin’s tapware is restricted, or if a wall-mounted mixer would be better suitable given the tabletop’s limited width.

4. Mounting Techniques

As discussed briefly previously, another issue is the mounting type of your tapware faucets and fixtures. While shower enclosures frequently need wall-mounted mixers, bathtubs may need either wall-mounted or hob-mounted mixers. Additionally, you may decide between a vanity-mounted mixer tap and a mixer combo (a combination of a mixer and a spout) positioned on the wall above the basin. Consider also the accessibility of pipe necessary for pre-installation behind the wall, regardless of whether in-wall or off-wall mixers are utilized.

April 16, 2022

How to make your bathroom appear like a five-star hotel

By Chelsea Blandowski in Tapware, Tiles and Bath Tag alder tapware, bathroom tapware, black tapware, brushed nickel tapware, faucets, kitchen tapware, nero tapware

Want a bathroom in your house that exudes the elegance and comfort of a five-star hotel? There is no need to embark on a full-scale renovation project at the moment. Adding a bit of glitz to your bathroom tapware does not necessarily need a major redesign of the area.

Consider any of these ornamental tapware embellishments for a more opulent-looking bathroom with less effort and great effects.

1. Ensure that your faucets are up to date.

While you will need the services of a plumber, replacing your bathroom tapware is a simple and quite efficient way to add some glitz to your area.

Create a moodboard or a Pinterest page to assist you in achieving the desired impact. Following that, you may decide on buy tapware melbourne that would work best for you.

“While it may seem to be a little element, the design of your tapware acts as a foundation for communicating your style plan,” explains Luli Farrell, co-founder and product designer at ABI Interiors.

The circular shape of our Milani mixer series exemplifies how we recommend geometrically designed tapware mixers for more contemporary bathrooms: our Barre and Elysian mixes are ideal for a more delicate but still stunning aesthetic.”

Additionally, Luli suggests examining your space and taking into account the size of your taps to avoid having taps that do not fit or look out of place.

“Keep in mind the dimensions of your bathroom,” she explains. “Can the size of the items be accommodated?” For instance, when standard-sized spouts are used in a tiny bathroom or powder room, the area may seem to be disproportionate.”

2. Invest on quality towels.

The effect that fresh towels (including hand towels and bathmats) can have on your house will astonish you, even more so if it has been a while since you last changed your towels.

To get a high-quality set – one that is both stylish and functional – you should budget between $40 and $60 each bath towel (more if you want the bigger, more luxurious “bath sheet”).

However, there are other low-cost alternatives on the market that give an adequate level of comfort, environmental friendliness, and aesthetic appeal.

3. Take into account the amount of storage space accessible.

Clutter is the archenemy of a luxurious look. If your floors, tapware vanity countertops, and shelves are piled with items, start thinking inventive of ways to arrange and store them.

Is it feasible to include any kind of shelving mechanism into the space, or would drawer organizers suffice?

In this case, small restrooms may be at a disadvantage. As a consequence, consider vertical thinking. Rather of stuffing your towels onto a towel rack, suspend a couple towel hooks from the ceiling.

Indeed, hanging hooks may be used to store both toilet paper and other objects. Simply get a lovely basket or bag and attach several rolls of toilet paper on the wall.

4. Consider purchasing a heated towel bar.

Not only can heated towel rails give optimum comfort and a hotel-like experience in the privacy of your own bathroom, but they also perform a variety of other essential duties.

According to Luli, “having freshly cleaned, warm towels available at your discretion is an unequaled delight.” They also act as a barrier to hygienic conditions by minimizing the probability of mould growing in a damp tapware environment. Additionally, it’s a good idea to stack two or three of them for optimal convenience.”

5. Use paint to embellish it

If any areas of your bathroom tapware are not tiled, it may be time to repaint the walls and ceiling. Experiment with a new color scheme and arrange fresh towels and accessories to match.

It’s critical to remember that if you’re doing it yourself, you must follow the essential waterproofing and moisture-resistant paint techniques.

6. Utilize opulent showers.

Everybody wants a bathroom fit for a five-star hotel — and the key to accomplishing this is the addition of a rain shower head.

To fully recreate the sense of rain with a rain tapware shower, Luli recommended that the shower head be positioned directly above the user’s head.

Either purchase a shower arm that replicates that position or install a ceiling-mounted shower dropper. If you want to utilize a shower dropper, check that the ceiling clearance is adequate to sustain it.”

Meanwhile, if you’re unable or unwilling to run plumbing through your ceiling, you can still put a rainfall shower on your wall – all you need is a long enough arm.

According to Luli, the Finley Shower Rail Set is a fantastic option since it can fit both a rain shower head and a hand shower fixture.

ABI offers an attractive 250mm circular waterfall shower head as part of their shower head line, which has eight distinct finishes ranging from matte black to brushed brass to chrome tapware.

7. Upgrade or replace lighting fixtures.

According to Luli, the installation of new light fixtures, whether wall sconces or pendant lights, may significantly improve a room’s overall impression of grandeur.

Another option is to add a mirror with LED backlighting. Apart from being utilitarian, it lends a bathroom an opulent Hollywood air, according to the designer.

8. Add some greenery.

What have you been doing to over the previous five years if indoor plants haven’t completely taken over your house?

Not only are indoor plants wonderful for air purification, but they also have the power to brighten up any dull, lifeless environment.

The best types for your bathroom are those that grow in moist conditions and do not need direct sunlight to flourish. This group of plants includes ferns, orchids, pothos, and a variety of other species. If in doubt, consult your local plant nursery.

9. Decorate stylishly.

A fashionable flourish would complement a large portion of your bathroom’s fundamental décor. Perhaps a porcelain soap dispenser, a lovely woven toilet paper basket, or a bamboo bath caddy are suitable for your space. Even utilitarian items, such as your toilet brush, no longer need to be dowdy and unsightly.

Luli feels that when it comes to luxury, smell may be a very powerful decorative element.

This is an aspect of interior design that we sometimes neglect but incorporating one of your favorite smells into the bathroom may help raise the space to new heights.”

10. Spruce it up a little.

Giving your bathroom a much-needed spring cleaning is the most efficient way to enhance its opulent feel.

Clean out those cabinets, dust the light fixtures, and re-establish the grout!

Simply cleaning the shower screens with Windex, properly washing the floor, and removing soap scum and grime from damp areas may significantly improve the appearance of a bathroom.

Category Tiles and Bath